? semiconductor components industries, llc, 2012 october, 2012 ? rev. 9 1 publication order number: mc74lcxu04/d mc74lcxu04 low-voltage cmos unbuffered hex inverter with 5 v ? tolerant inputs the mc74lcxu04 is a high performance unbuffered hex inverter operating from a 2.3 to 3.6 v supply. (high impedance ttl compatible inputs significantly reduce current loading to input drivers while ttl compatible outputs offer improved switching noise performance.) a v i specification of 5.5 v allows mc74lcxu04 inputs to be safely driven from 5 v devices. features ? designed for 2.3 to 3.6 v v cc operation ? 5 v tolerant inputs ? interface capability with 5 v ttl logic ? lvttl compatible ? lvcmos compatible ? near zero static supply current (10 a) substantially reduces system power requirements ? latchup performance exceeds 500 ma ? esd performance: ? human body model >2000 v ? machine model >200 v ? these devices are pb ? free, halogen free/bfr free and are rohs compliant marking diagrams tssop ? 14 dt suffix case 948g 14 1 soic ? 14 d suffix case 751a 14 1 lcxu04g awlyww see detailed ordering and shipping information in the package dimensions section on page 4 of this data sheet. ordering information 1 14 http://onsemi.com lcx u04 alyw 1 14 a = assembly location l, wl = wafer lot y, yy = year w, ww = work week g or = pb ? free package (note: microdot may be in either location)
mc74lcxu04 http://onsemi.com 2 figure 1. pinout: 14 ? lead (top view) 13 14 12 11 10 9 8 2 1 34567 v cc a3 o3 a4 o4 a5 o5 a0 o0 a1 o1 a2 o2 gnd 2 o0 1 a0 4 o1 3 a1 6 o2 5 a2 12 o3 13 a3 10 o4 11 a4 8 o5 9 a5 pin names function data inputs outputs pins an on truth table an on l h h l figure 2. logic diagram maximum ratings symbol parameter value condition units v cc dc supply voltage ? 0.5 to +7.0 v v i dc input voltage ? 0.5 v i +7.0 v v o dc output voltage ? 0.5 v o v cc + 0.5 output in high or low state. (note 1) v i ik dc input diode current ? 50 v i < gnd ma i ok dc output diode current ? 50 v o < gnd ma +50 v o > v cc ma i o dc output source/sink current 50 ma i cc dc supply current per supply pin 100 ma i gnd dc ground current per ground pin 100 ma t stg storage temperature range ? 65 to +150 c msl moisture sensitivity level 1 maximum ratings are those values beyond which device damage can occur. maximum ratings applied to the device are individual str ess limit values (not normal operating conditions) and are not valid simultaneously. if these limits are exceeded, device functional operation i s not implied, damage may occur and reliability may be affected. 1. i o absolute maximum rating must be observed.
mc74lcxu04 http://onsemi.com 3 recommended operating conditions symbol parameter min typ max units v cc supply voltage operating data retention only 2.0 1.5 2.5, 3.3 2.5, 3.3 3.6 3.6 v v i input voltage 0 5.5 v v o output voltage (high or low state) 0 v cc v i oh high level output current v cc = 3.0 v ? 3.6 v v cc = 2.7 v ? 3.0 v v cc = 2.3 v ? 2.7 v ? 18 ? 12 ? 8 ma i ol low level output current v cc = 3.0 v ? 3.6 v v cc = 2.7 v ? 3.0 v v cc = 2.3 v ? 2.7 v +16 +12 +8 ma t a operating free ? air temperature ? 40 +85 c t/ v input transition rise or fall rate, v in from 0.8 v to 2.0 v, v cc = 3.0 v 0 10 ns/v dc electrical characteristics t a = ? 40 c to +85 c symbol characteristic condition min max units v ih high level input voltage (note 2) v cc = 2.3 v 1.7 v v cc = 2.7 v 2.1 v cc = 3.0 v 2.2 v cc = 3.6 v 2.7 v il low level input voltage (note 2) v cc = 2.3 v 0.55 v v cc = 2.7 v 0.55 v cc = 3.0 v 0.55 v cc = 3.6 v 0.55 v oh high level output voltage 2.3 v v cc 3.6 v; i ol = 100 a v cc ? 0.2 v v cc = 2.3 v; i oh = ? 8 ma 1.8 v cc = 2.7 v; i oh = ? 12 ma 2.2 v cc = 3.0 v; i oh = ? 18 ma 2.4 v ol low level output voltage 2.3 v v cc 3.6 v; i ol = 100 a 0.2 v v cc = 2.3 v; i ol = 8 ma 0.6 v cc = 2.7 v; i ol = 12 ma 0.4 v cc = 3.0 v; i ol = 16 ma 0.5 i off power off leakage current v cc = 0, v in = 5.5 v or v out = 5.5 v 10 a i in input leakage current v cc = 3.6 v, v in = 5.5 v or gnd 5 a i cc quiescent supply current v cc = 3.6 v, v in = 5.5 v or gnd 10 a i cc increase in i cc per input 2.3 v cc 3.6 v; v ih = v cc ? 0.6 v 500 a 2. these values of v i are used to test dc electrical characteristics only.
mc74lcxu04 http://onsemi.com 4 ac characteristics (t r = t f = 2.5 ns; r l = 500 ) (note 3) symbol parameter waveform limits units t a = ? 40 c to +85 c v cc = 3.3 v 0.3 v v cc = 2.7 v v cc = 2.5 v 0.2 v c l = 50 pf c l = 50 pf c l = 30 pf min max min max min max t plh t phl propagation delay input to output 1 1.0 1.0 3.6 3.6 1.0 1.0 4.5 4.5 1.0 1.0 4.3 4.3 ns t oshl t oslh output ? to ? output skew (note 4) 1.0 1.0 ns 3. these ac parameters are preliminary and may be modified. 4. skew is defined as the absolute value of the dif ference between the actual propagation delay for any two separate outputs of the same d evice. the specification applies to any outputs switching in the same direction, either high ? to ? low (t oshl ) or low ? to ? high (t oslh ); parameter guaranteed by design. dynamic switching characteristics t a = +25 c symbol characteristic condition min typ max units v olp dynamic low peak voltage (note 5) v cc = 3.3 v, c l = 50 pf, v ih = 3.3 v, v il = 0 v v cc = 2.5 v, c l = 30 pf, v ih = 2.5 v, v il = 0 v 0.8 0.6 v v olv dynamic low valley voltage (note 5) v cc = 3.3 v, c l = 50 pf, v ih = 3.3 v, v il = 0 v v cc = 2.5 v, c l = 30 pf, v ih = 2.5 v, v il = 0 v ? 0.8 ? 0.6 v 5. number of outputs defined as ?n?. measured with ?n ? 1? outputs switching from high ? to ? low or low ? to ? high. the remaining output is measured in the low state. capacitive characteristics symbol parameter condition typical units c in input capacitance v cc = 3.3 v, v i = 0 v or v cc 7 pf c out output capacitance v cc = 3.3 v, v i = 0 v or v cc 8 pf c pd power dissipation capacitance 10 mhz, v cc = 3.3 v, v i = 0 v or v cc 25 pf ordering information device package shipping ? mc74lcxu04dg soic ? 14 (pb ? free) 55 units / rail mc74lcxu04dr2g soic ? 14 (pb ? free) 2500 tape & reel MC74LCXU04DTG tssop ? 14 (pb ? free) 96 units / rail mc74lcxu04dtr2g tssop ? 14 (pb ? free) 2500 tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
mc74lcxu04 http://onsemi.com 5 propagation delays t r = t f = 2.5 ns, 10% to 90%; f = 1 mhz; t w = 500 ns v cc 0 v v oh v ol an o n t plh t phl vmi vmo vmo vmi symbol v cc 3.3 v 0.3 v 2.7 v 2.5 v 0.2 v vmi 1.5 v 1.5 v v cc /2 vmo 1.5 v 1.5 v v cc /2 figure 3. ac waveforms pulse generator r t dut v cc r l c l c l = 50 pf at v cc = 3.3 0.3 v or equivalent (includes jig and probe capacitance) c l = 30 pf at v cc = 2.5 0.2 v or equivalent (includes jig and probe capacitance) r l = r 1 = 500 or equivalent r t = z out of pulse generator (typically 50 ) figure 4. test circuit
mc74lcxu04 http://onsemi.com 6 package dimensions soic ? 14 nb case 751a ? 03 issue k notes: 1. dimensioning and tolerancing per asme y14.5m, 1994. 2. controlling dimension: millimeters. 3. dimension b does not include dambar protrusion. allowable protrusion shall be 0.13 total in excess of at maximum material condition. 4. dimensions d and e do not include mold protrusions. 5. maximum mold protrusion 0.15 per side. h 14 8 7 1 m 0.25 b m c h x 45 seating plane a1 a m s a m 0.25 b s c b 13x b a e d e detail a l a3 detail a dim min max min max inches millimeters d 8.55 8.75 0.337 0.344 e 3.80 4.00 0.150 0.157 a 1.35 1.75 0.054 0.068 b 0.35 0.49 0.014 0.019 l 0.40 1.25 0.016 0.049 e 1.27 bsc 0.050 bsc a3 0.19 0.25 0.008 0.010 a1 0.10 0.25 0.004 0.010 m 0 7 0 7 h 5.80 6.20 0.228 0.244 h 0.25 0.50 0.010 0.019 6.50 14x 0.58 14x 1.18 1.27 dimensions: millimeters 1 pitch soldering footprint* *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d.
mc74lcxu04 http://onsemi.com 7 package dimensions tssop ? 14 case 948g ? 01 issue b dim min max min max inches millimeters a 4.90 5.10 0.193 0.200 b 4.30 4.50 0.169 0.177 c ??? 1.20 ??? 0.047 d 0.05 0.15 0.002 0.006 f 0.50 0.75 0.020 0.030 g 0.65 bsc 0.026 bsc h 0.50 0.60 0.020 0.024 j 0.09 0.20 0.004 0.008 j1 0.09 0.16 0.004 0.006 k 0.19 0.30 0.007 0.012 k1 0.19 0.25 0.007 0.010 l 6.40 bsc 0.252 bsc m 0 8 0 8 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimension a does not include mold flash, protrusions or gate burrs. mold flash or gate burrs shall not exceed 0.15 (0.006) per side. 4. dimension b does not include interlead flash or protrusion. interlead flash or protrusion shall not exceed 0.25 (0.010) per side. 5. dimension k does not include dambar protrusion. allowable dambar protrusion shall be 0.08 (0.003) total in excess of the k dimension at maximum material condition. 6. terminal numbers are shown for reference only. 7. dimension a and b are to be determined at datum plane ? w ? . s u 0.15 (0.006) t 2x l/2 s u m 0.10 (0.004) v s t l ? u ? seating plane 0.10 (0.004) ? t ? ??? ??? section n ? n detail e j j1 k k1 ? w ? 0.25 (0.010) 8 14 7 1 pin 1 ident. h g a d c b s u 0.15 (0.006) t ? v ? 14x ref k n n 7.06 14x 0.36 14x 1.26 0.65 dimensions: millimeters 1 pitch soldering footprint
mc74lcxu04 http://onsemi.com 8 on semiconductor and are registered trademarks of semiconductor co mponents industries, llc (scillc). scillc owns the rights to a numb er of patents, trademarks, copyrights, trade secrets, and other intellectual property. a list ing of scillc?s product/patent coverage may be accessed at ww w.onsemi.com/site/pdf/patent ? marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. all operating parame ters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the right s of others. scillc products are not designed, intended, or a uthorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in whic h the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or us e scillc products for any such unintended or unauthorized appli cation, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unin tended or unauthorized use, even if such claim alleges that scil lc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyrig ht laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5817 ? 1050 mc74lcxu04/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative
|
